23% Discount
Flamingo Nano Ceramic Coating
৳3500
৳2700
USAGE DIRECTION:
A. Wash the car carefully,remove all dirty on the paint surface .
B. Use polishing machine with F050 Rubbing Compound/ F051 Polishing glaze/F052 Premium Coating Film(subject to paint conditions ,new car use F052 only).
C. Clean the dust and grease after polishing, please remove grease with Flamingo Degreasing agent or wash with F030 neutral shampoo with dilution rate 1:300 ,then wash by clean water and dry.
D.Please operate with small area(50*50cm) each time, one piece finished then start another. Avoid large-area operation.
E. Pour the NANO CERAMIC COATING(1) on the matched sponge in moderate amounts, then apply it to the surface equally in the order of up-down and left-right. If uneven lines left in plating period, so will left after plating. So please be sure to apply evenly, DO NOT POUR THE SOLVENT ON THE CAR DIRECTLY.
F. When the working temperature within 20°C-25°C, please wait 3-5mins, then wipe with dry towel till the surface become shining; The waiting time should be shorten if the working temperature over 25°C, waiting more than 10mins will cause coating harden.
G. After complete the coating with all paint surface ,wait 1 hour to let coating film dry .
H. Open PROTECTS & POLISHING AGENT (2),put valve on bottle and spray on coating film and polish it equally .
I. Please wait 72 hours to let it crystallize completely for the best effect. The car can be move during the waiting time. But do not wash it or pour water on it, lest the effect reduced. In case of water contact, dry off immediately.
J. Flamingo advise to use PROTECTS & POLSHING AGENT(2) in 2nd time after 3 months.
Reviews (0)
Get specific details about this product from customers who own it.
This product has no reviews yet. Be the first one to Give a review.
.jpeg)
